PR 10-0.5 V4

Hydraulic tube 10x0.5 1.4571

The product image may differ

Ø d1

10 mm

0.5 mm

Specific load I

105 bar

Prenos datoteke PDF

Izberite izvedbo

Show table of articles

PR 04-1 V4 PR 06-0.5 V4 PR 06-1 V4 PR 06-1.5 V4 PR 06-2 V4 PR 08-1 V4 PR 08-1.5 V4 PR 08-2 V4 PR 10-0.5 V4 PR 10-1 V4 PR 10-1.5 V4 PR 10-2 V4 PR 12-1 V4 PR 12-1.5 V4 PR 12-2 V4 PR 12-3 V4 PR 14-1.5 V4 PR 14-2 V4 PR 14-2.5 V4 PR 15-1 V4 PR 15-1.5 V4 PR 15-2 V4 PR 16-1.5 V4 PR 16-2 V4 PR 16-2.5 V4 PR 16-3 V4 PR 18-1 V4 PR 18-1.5 V4 PR 18-2 V4 PR 18-2.5 V4 PR 20-2 V4 PR 20-2.5 V4 PR 20-3 V4 PR 20-3.5 V4 PR 22-1.5 V4 PR 22-2 V4 PR 22-2.5 V4 PR 22-3 V4 PR 22-4 V4 PR 25-1.5 V4 PR 25-2 V4 PR 25-2.5 V4 PR 25-3 V4 PR 25-4 V4 PR 28-1.5 V4 PR 28-2 V4 PR 28-2.5 V4 PR 30-2 V4 PR 30-2.5 V4 PR 30-3 V4 PR 30-4 V4 PR 30-5 V4 PR 35-1.5 V 4 PR 35-2 V4 PR 35-2.5 V4 PR 35-3 V4 PR 35-4 V4 PR 35-5 V 4 PR 38-3 V4 PR 38-4 V4 PR 38-5 V4 PR 38-6 V4 PR 42-2 V4 PR 42-3 V4

Our customer service: +49-421-48907-766

Podrobnosti o izdelku za

PR 10-0.5 V4

Ø d1

10 mm

0.5 mm

Specific load I

105 bar

Specific load III

81 bar

Ø d2

9 mm

AD tolerance +/-

0.08 mm

ID tolerance +/-

0.08 mm

Vse lastnosti

Lastnosti

Construction type

precision steel tube, seamless, (cold-drawn), metric

Design

metric

Material

stainless steel X6CrNiMoTi17-12-2 (1.4571 / AISI 316Ti)

Material condition

CFA = bright annealed (annealed, metallically bright)

Standard

DIN EN 10216-5

Tube length

5 to 7 metres*.

Customs tariff number

73044100

Vse lastnosti

Product description

Opombe

Navedeni podatki za tlak veljajo za ravne cevi.
Če je cev ukrivljena, je treba ustrezno standardu DIN EN 13480-4 preračunati debeline sten.
*Po EN 10216-5 so nerjaveče jeklene cevi dobavljene v izdelanih dolžinah. Glede na proizvodno tehnologijo so te dolžine običajno 6 metrov (±1 m). Naročene količine so zaokrožene na najbližjo možno skupno dolžino brez rezanja.

Opis

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Dodatne informacije

izračun v skladu DIN 2413
obremenitev I : statična (do 120 °C)
obremenitveni primer III : dinamični (do 120 °C) širina nihanja = P bar
pokazatelj trdnosti: K 234 [N/mm²]
varnostni faktor: S 1,5
trajna mejna trdnost: σSch/D 190 [N/mm2]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
trdnost ob raztezku po DIN 10216-5 Rp 1,0 bis 50 °C

Opomba za naročilo

Other delivery conditions, such as CFD, are available on request and must be specified separately.