K- 07 15 07 53

Rodless cylinder

The product image may differ

3D-model

Ø Piston

25 mm

Stroke

700 mm

Connecting thread

G 1/8″ -28

Prenos datoteke PDF

Izberite izvedbo

Prikaži tabelo artiklov

K- 07 15 07 34 K- 07 15 07 35 K- 07 15 07 36 K- 07 15 07 37 K- 07 15 07 38 K- 07 15 07 39 K- 07 15 07 40 K- 07 15 07 41 K- 07 15 07 42 K- 07 15 07 43 K- 07 15 07 44 K- 07 15 07 45 K- 07 15 07 46 K- 07 15 07 47 K- 07 15 07 48 K- 07 15 07 49 K- 07 15 07 50 K- 07 15 07 51 K- 07 15 07 52 K- 07 15 07 53 K- 07 15 07 54 K- 07 15 07 55 K- 07 15 07 56 K- 07 15 07 57 K- 07 15 07 58 K- 07 15 07 59 K- 07 15 07 60 K- 07 15 07 61 K- 07 15 07 62 K- 07 15 07 63 K- 07 15 07 64 K- 07 15 07 65 K- 07 15 07 66 K- 07 15 07 67 K- 07 15 07 68 K- 07 15 07 69 K- 07 15 07 70 K- 07 15 07 71 K- 07 15 07 72 K- 07 15 07 73 K- 07 15 07 74 K- 07 15 07 75 K- 07 15 07 76 K- 07 15 07 77 K- 07 15 07 78 K- 07 15 07 79 K- 07 15 07 80 K- 07 15 07 81 K- 07 15 07 82 K- 07 15 07 83 K- 07 15 07 84 K- 07 15 07 85 K- 07 15 07 86 K- 07 15 07 87 K- 07 15 07 88 K- 07 15 07 89 K- 07 15 07 90 K- 07 15 07 91 K- 07 15 07 92 K- 07 15 07 93 K- 07 15 07 94 K- 07 15 07 95 K- 07 15 07 96 K- 07 15 07 97 K- 07 15 07 98

Zdaj se registrirajte, da boste lahko dostopali do naše spletne trgovine.

Naša servisna služba: +49-421-48907-766

Podrobnosti o izdelku za

K- 07 15 07 53

Ø Piston

25 mm

Stroke

700 mm

Connecting thread

G 1/8″ -28

Max. side load

1.0 Nm

Lastnosti

Working pressure

1 to 8 bar

Internal/external strap

stainless steel

Seal

NBR for speeds up to maximum 1 m/s

Slide table (piston guide)

aluminium alloy, anodised

Housing

profiled tube from aluminium, anodised

Media

Filtered (50 µm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuously lubricated.

Temp. range

-15 °C to +80 °C

Customs tariff number

84123100

Vse lastnosti

Opis izdelka

Opombe

Further information on request.

Opis

These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.

Dodatne informacije

Important: The scope of supply does not include a connector. Please order separately.

Opomba za naročilo

All stroke lengths up to max. 5000 mm (Ø 16) respectively 5700 mm (from Ø 25) are available in 1-mm steps. Versions with integrated linear guidance are available upon request (up to 50x lateral load possible).