Kaj iščete?

Vnesite iskalni pojem

Žal nam je!

Ne najdem rezultatov iskanja.

Prijava

Ste nova stranka?

Registrirajte se in si zagotovite številne prednosti:

Preverjanje razpoložljivosti izdelka
Hitro naknadno naročanje in zgodovina naročil
Osebna priporočila za izdelke
Plačilo na račun

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
Pogosta vprašanja

HK PCFC 12 NS0 15

2-W flow control valve Cartr Sz12 28-57L
Q max.
90 l/min
Q min.
57 l/min
A
49.8 mm
Prenos datoteke PDF
Zdaj se registrirajte, da boste lahko dostopali do naše spletne trgovine.

Register now and access our complete product range and many exclusive services.

Podrobnosti o izdelku za

HK PCFC 12 NS0 15

Q max.
90 l/min
Q min.
57 l/min
A
49.8 mm
B
44.5 mm
Screw-in hole
SAE 12/2
Screw-in housing
HK GEH 12 C 1220 HK GEH 34 C 1220
Screw-in thread
UNF 1.1/16″ -12 -2B
Setting range with Qon max.
57 l/min
Setting range with Qon min.
28.5 l/min
Vse lastnosti

Lastnosti

Max. working pressure
  • max. 300 bar 
Design
  • pressure-compensated 
Customs tariff number
  • 84812010 

Opis izdelka

Opombe
These valves must be set according to the application.
Tightening torque for valve size 08 with aluminium housing: 34-41 Nm
Tightening torque for valve size 08 with steel housing: 47 - 54 Nm
Tightening torque for valve size 10 with aluminium housing: 47-54 Nm
Tightening torque for valve size 10 with steel housing: 74 - 81 Nm
Tightening torque for valve size 12 with aluminium housing: 74-81 Nm
Tightening torque for valve size 12 with steel housing: 95 - 102 Nm
SAE screw-in bores of Cartridge valves from different manufacturers may differ slightly, e.g., in the depth and diameter of the valve seat, even if the screw-in thread is the same. For this reason, it is essential that all relevant dimensions are compared with the technical data of the screw-in bore must be compared.
Opis
Setting via setscrew.
Max. deviation: 5 %.
Only adjust valves in depressurized state!

Product variants

3 Results
Prikaz dimenzijske risbe
Oznaka
Q maks. (l/min)
Q min. (l/min)
A (mm)
B (mm)
Qein = intake volumetric flow
Qmax - max. intake volumetric flow
Qmin - min. volumetric flow for control function

Column selection

Q maks. (l/min)
Q min. (l/min)
A (mm)
B (mm)
Območje nastavitve pri Qein maks. (l/min)
Območje nastavitve pri Qein min. (l/min)
Odprtina za vijačenje
Uvojni navoj
Uvojno ohišje
Qein = intake volumetric flow
Qmax - max. intake volumetric flow
Qmin - min. volumetric flow for control function