K- 07 15 07 59

Rodless cylinder

The product image may differ

3D-model

Sila pri 6 barih

250 N

Ø Bata

25 mm

Gib

2.000 mm

Prenos datoteke PDF

Izberite izvedbo

Prikaži tabelo artiklov

K- 07 15 07 34 K- 07 15 07 35 K- 07 15 07 36 K- 07 15 07 37 K- 07 15 07 38 K- 07 15 07 39 K- 07 15 07 40 K- 07 15 07 41 K- 07 15 07 42 K- 07 15 07 43 K- 07 15 07 44 K- 07 15 07 45 K- 07 15 07 46 K- 07 15 07 47 K- 07 15 07 48 K- 07 15 07 49 K- 07 15 07 50 K- 07 15 07 51 K- 07 15 07 52 K- 07 15 07 53 K- 07 15 07 54 K- 07 15 07 55 K- 07 15 07 56 K- 07 15 07 57 K- 07 15 07 58 K- 07 15 07 59 K- 07 15 07 60 K- 07 15 07 61 K- 07 15 07 62 K- 07 15 07 63 K- 07 15 07 64 K- 07 15 07 65 K- 07 15 07 66 K- 07 15 07 67 K- 07 15 07 68 K- 07 15 07 69 K- 07 15 07 70 K- 07 15 07 71 K- 07 15 07 72 K- 07 15 07 73 K- 07 15 07 74 K- 07 15 07 75 K- 07 15 07 76 K- 07 15 07 77 K- 07 15 07 78 K- 07 15 07 79 K- 07 15 07 80 K- 07 15 07 81 K- 07 15 07 82 K- 07 15 07 83 K- 07 15 07 84 K- 07 15 07 85 K- 07 15 07 86 K- 07 15 07 87 K- 07 15 07 88 K- 07 15 07 89 K- 07 15 07 90 K- 07 15 07 91 K- 07 15 07 92 K- 07 15 07 93 K- 07 15 07 94 K- 07 15 07 95 K- 07 15 07 96 K- 07 15 07 97 K- 07 15 07 98

Zdaj se registrirajte, da boste lahko dostopali do naše spletne trgovine.

Naša servisna služba: +49-421-48907-766

Podrobnosti o izdelku za

K- 07 15 07 59

Sila pri 6 barih

250 N

Ø Bata

25 mm

Gib

2.000 mm

Priključni navoj

G 1/8″ -28

maks. stranska obremenitev

1.0 Nm

Vse lastnosti

Lastnosti

Delovni tlak

1 to 8 bar

Rani (vodilo bata)

zlitina aluminija, eloksirana

Tesnilo

NBR za hitrosti do maksimalno 1 m/s

notranji/zunanji trak

nerjaveče jeklo

Mediji

Filtriran (50 μm), neumazan ali naoljen stisnjen zrak. Pri uporabi naoljenega stisnjenega zraka zagotovite neprekinjeno mazanje.

Ohišje

profilna cev iz zlitine aluminija, eloksirana

Temp. območje

-15 °C do +80 °C

Številka carinske tarife

84123100

Vse lastnosti

Opis izdelka

Opombe

Further information on request.

Opis

These double-acting cylinders can also be supplied with strokes greater than 5 m, providing the stroke length is approximately equal to the overall length. They are equipped with magnets as standard for indicating the position as well as pneumatic, adjustable end position cushioning. Limit switches and hydraulic shock absorbers can be mounted as add-on modules.

Dodatne informacije

Important: The scope of supply does not include a connector. Please order separately.

Opomba za naročilo

All stroke lengths up to max. 5000 mm (Ø 16) respectively 5700 mm (from Ø 25) are available in 1-mm steps. Versions with integrated linear guidance are available upon request (up to 50x lateral load possible).