HK DG4V5 A 110VAC

Magnetspule 110V AC für HKDG4V5

The product image may differ

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

7 W

Prenos datoteke PDF

Izberite izvedbo

Prikaži tabelo artiklov

HK DG4V5 G 12VDC HK DG4V5 H 24VDC HK DG4V5 A 110VAC

Zdaj se registrirajte, da boste lahko dostopali do naše spletne trgovine.

Naša servisna služba: +49-421-48907-766

Podrobnosti o izdelku za

HK DG4V5 A 110VAC

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

7 W

Lastnosti

Customs tariff number

85059029

Opis izdelka

Opombe

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
Tightening torque for attaching nuts of the solenoid coils: 3Nm

Opomba za naročilo

Other types of coil available on request