PR 35-1.5 V 4

Hidravl.cev 35x1,5 1.4571

The product image may differ

Ø d1

35 mm

1,5 mm

Primer obremenitve I

119 bar

Prenos datoteke PDF

Izberite izvedbo

Prikaži tabelo artiklov

PR 04-1 V4 PR 06-0.5 V4 PR 06-1 V4 PR 06-1.5 V4 PR 06-2 V4 PR 08-1 V4 PR 08-1.5 V4 PR 08-2 V4 PR 10-0.5 V4 PR 10-1 V4 PR 10-1.5 V4 PR 10-2 V4 PR 12-1 V4 PR 12-1.5 V4 PR 12-2 V4 PR 12-3 V4 PR 14-1.5 V4 PR 14-2 V4 PR 14-2.5 V4 PR 15-1 V4 PR 15-1.5 V4 PR 15-2 V4 PR 16-1.5 V4 PR 16-2 V4 PR 16-2.5 V4 PR 16-3 V4 PR 18-1 V4 PR 18-1.5 V4 PR 18-2 V4 PR 18-2.5 V4 PR 20-2 V4 PR 20-2.5 V4 PR 20-3 V4 PR 20-3.5 V4 PR 22-1.5 V4 PR 22-2 V4 PR 22-2.5 V4 PR 22-3 V4 PR 22-4 V4 PR 25-1.5 V4 PR 25-2 V4 PR 25-2.5 V4 PR 25-3 V4 PR 25-4 V4 PR 28-1.5 V4 PR 28-2 V4 PR 28-2.5 V4 PR 30-2 V4 PR 30-2.5 V4 PR 30-3 V4 PR 30-4 V4 PR 30-5 V4 PR 35-1.5 V 4 PR 35-2 V4 PR 35-2.5 V4 PR 35-3 V4 PR 35-4 V4 PR 35-5 V 4 PR 38-3 V4 PR 38-4 V4 PR 38-5 V4 PR 38-6 V4 PR 42-2 V4 PR 42-3 V4

Zdaj se registrirajte, da boste lahko dostopali do naše spletne trgovine.

Naša servisna služba: +49-421-48907-766

Podrobnosti o izdelku za

PR 35-1.5 V 4

Ø d1

35 mm

1,5 mm

Primer obremenitve I

119 bar

Primer obremenitve III

93 bar

Ø d2

32 mm

ID tolerance +/-

0.08 mm

AD tolerance +/-

0.08 mm

Vse lastnosti

Lastnosti

Izvedba

metrični

Material

stainless steel X6CrNiMoTi17-12-2 (1.4571 / AISI 316Ti)

Način izdelave

precizna jeklena cev, brezšivna (hladno vlečena), metrična

Način izdelave-dodatek

CFA = bright annealed (annealed, metallically bright)

Standard

DIN EN 10216-5

Dolžina cevi

5 do 7 metrov*

Številka carinske tarife

73044100

Vse lastnosti

Opis izdelka

Opombe

The pressure figures are based on straight tubes.
The appropriate wall thickness needs to be calculated for tubes with bends as stipulated in DIN EN 13480-4.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Opis

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Dodatne informacije

Calculation analog DIN 2413
Specific load I: static (up to 120 °C)
Load case III: dynamic (up to 120 °C) stress range = P bar
Strength parameter: K 234 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 190 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C

Opomba za naročilo

Other delivery conditions, such as CFD, are available on request and must be specified separately.